400ml Supreme Wax Polish - Liming Wax

Fiddes Liming Wax is a ideal for application on woods such as oak, or those which normally exhibit a distinctive deep grain pattern. Perfect for use on interior floors, doors, skirting boards, architraves, kitchen cabinet doors and more to achieve a traditional limed wax finish.

Ensure surfaces to be treated are clean, dry and free from dirt, dust and other surface contaminants prior to application of Liming Wax.

1. Remove all previous coatings and finishes, including paints, varnishes, waxes and oils
2. Sand the wood with a 120 grit sandpaper, through to a medium / fine grit of 180 to 220
3. Sand in the direction of the grain where possible
4. Take care to remove all traces of sanding dust from the area to be waxed
5. De-grease the wood using methylated spirits if required
6. For a true limed effect, rake the surface of the wood with a clean wire brush, following the grain and seal with a suitable shellac polish, sanding sealer or similar
7. Fill any holes or gaps in wooden floors with Fiddes Floor Repair Kit.
8. For filling other wood surfaces, use Fiddes Wood Filler Gel.

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

1. Fiddes Liming Wax is best applied with a clean, lint-free cloth
2. Apply sparingly, working on one small area at a time
3. Leave for 15 minutes to dry
4. Apply additional coats as required
5. Buff in the direction of the grain with a clean cotton cloth

Once dry, Fiddes Liming Wax must be finished with a coat of Fiddes Supreme Wax Polish in clear  to retain the limed look. This increases the sheen level and adds protection to the limed finish.